Table of Contents

1. G-code

The G-code is partially dependent on the model of the printer.

1.1. G-commands

  • G0 Rapid Move, G1 Linear Move
    • Xnnn Ynnn Znnn Ennn xyz position and extrusion. nnn Integer or Float.
  • G2 Clockwise Arc, G3 Counter-clockwise Arc
    • Xnnn Ynnn Znnn Innn Jnnn xyz position and relative xy position of the center or the arc
  • G4 Dwell
    • Pnnn time in milliseconds

2. References

Author: Jeemin Kim

Created: 2026-07-16 Thu 21:34